新捕京3522com

Contact us

Wenzhou Yuezhong Mechanical Tech. Co.,Ltd
Puer Ind.Zone,Oubei Town,Yongjia Zhejiang,China.
Phone:13567722902
FAX:+86-577-67958772
TEL:+86-577-67952188
   +86-577-67958770
Email:sales@yz-m.com

News

Current Location:Home >> News >> FIXING POWER LOCK ACTUATORS

FIXING POWER LOCK ACTUATORS

Source:新捕京3522com原创 Author:master UpdateTime:2014-4-30 8:36:12 Hits:3820

From time to time, power lock actuators will turn out stuck. Fortunately, the remedy is easy in most situations. 

While repairing an actuator, remove the panel of the door containing the lock that is broken using the proper screwdrivers. Use the vehicle's schematic to find out the location of the screws that need removal, if necessary. Gently loosen the plastic weather shield that covers the internals of the door before removing the plastic. Grab the rod heading into the electric actuators. The actuator is a white or black plastic housing with the rod that ties with the lock. While locking and unlocking the door from the key fob or door limit switch , move the rod to give a hand to it. Maintain the rod in its unlocked position after a few cycles. After that, apply silicone lubricant into the actuator and over the rod and allow it to penetrate the actuator and rod for 10 to 15 minutes. Put the tongue of the oil applicator into the end of the actuator, pump two or three drops into the end of the actuator and let this stand for a few minutes to permit penetration. 

Lock and unlock the door several times to make sure appropriate coverage of the applied lubricants. Return the panel and trim.
XML 地图 | Sitemap 地图